LSOSI-P, LSOSI-R LightSync Digital Occupancy Sensor Input LSOSI-P, LSOSI-R LightSync Digital Occupancy Sensor Input

LightSync Digital Occupancy Sensor Input

Models: LSOSI-P, LSOSI-R, LSOSI-PR-P

The LightSync Digital Occupancy Sensor Input module is designed to power and receive signals from 2 sensors on each of its 4 independent inputs. Eliminate expensive power packs by simply direct- wiring the sensors into the LightLEEDer inputs. This module mounts directly in the panel on the output module, or can be mounted remotely in a location central to the sensors. Each independent input can control any relay(s), group(s), or preset(s) throughout the network. Inputs also have a time-of- day or open/close time-of-action which could disable the input or change the relays controlled.

Wiring Diagrams

LightSync Occupancy Sensor Input Module (WD0603)

pdf

Installation Guides

LightSync Occupancy Sensor Input Module (ID0617)

pdf
Specifications

Safeguards:

  • Optically isolated inputs protect electronics

Physical:

  • 2.75”W x 3.5” H
  • Easy non-screw push-to-connect connectors
  • Digital addressing switches
  • RJ45 connectors for remote mounting option
  • Remote mount option includes mounting plate and transformer

Electrical:

  • Powered from panel transformer (remote option powered by 24VAC transformer).
  • 200mA @ 24VDC maximum draw per module

Operating Environment:

  • Location: Interior space
  • Operating Temp.: 0° to 50° C
  • Humidity: 10% - 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:

  • FCC Part 15
Resources

Typical Drawings

View Code Specific Room Typicals View Distributed Typicals View Relay Typicals View Stand Alone Typicals

Product Details

LightSync Occupancy Sensor Input Module (PD0617)

pdf
Features
  • Made in the USA
  • Digital CAT-5 Ready
  • Provides power and inputs for occupancy sensors
  • Installs directly onto the output board
  • Digitally addressable device for a unique address
  • Remote mounting option for LightSync network
  • Connectors are easy non-screw push-to-connect type
  • Optically isolated inputs to protect the electronics
  • Sensor signals accepted directly on module
  • Connect multiple sensors to each input
  • Power packs not required
  • Works with most major manufactured sensors

Remote Mounting Option:

  • Remote mount anywhere on the LightSync network
  • Self powered from the network
  • RJ45 connectors provided for easy connection
  • Mounting plate available
  • Great choice for a central switch control station. Eliminates wiring individual switches to panels - only a data line required