Search ILC


The LightLEEDer Serial Interface Module can be added to any panel to provide control from any building automation system using BACnet IP, BACnet MSTP, Modbus RTU, Modbus ASCII, Modbus TCP, LonWorks, or Metasys N2 serial protocol. With the panel module, commands can be sent to the panel to force relays ON and OFF, force relays On and OFF with a timer option (Blink, Double blink, HID delay, Alarm ON, Alarm OFF, Pulse ON, and Pulse OFF), monitor relay status, monitor local input status, enable/disable LightSync Devices, control dimmer outputs, and control motor outputs . A single point gateway is available for control and status of relays, groups, and presets on the network.

  • Direct control for Building Automation System
  • Connect with BACnet MSTP, Modbus, LonWorks, or Metasys N2
  • Allows direct control and status of relays
  • Provides Group and Preset control and status
  • Able to control relays using timer options
  • Allows BAS to enable or disable switch inputs
  • Interface Dimmers and Motor controller directly
  • Optional single point gateway available


  • BACnet IP- an ASHRAE protocol communicating on a TCP/IP network
  • BACnet MSTP- an ASHRAE protocol communicating on a RS485 network
  • Modbus RTU- a Modicon protocol communicating on RS485 in a binary coded format
  • Modbus ASCII- a Modicon protocol communicating on RS485 in an ASCII coded format
  • Modbus TCP- a Modicon protocol communicating on a TCP/IP network
  • LonWorks- an Echelon protocol communicating on a 2 wire data line
  • Metasys N2- a Johnson Controls protocol communicating on RS485

General Information:

  • Direct communications for BAS control of lighting panel
  • Made in the USA
  • Direct control of any relay output giving complete control
  • True status of relays in the lighting panel
  • Timer option commands available for blink alerts and alarms
  • Allows enable/disable commands for switch inputs
  • Installs directly into any panel
  • Extractable files from BACnet and LonWorks modules

Panel Level Control Information

  • Panel level control of all relays
  • Installation of up to 4 modules per panel (Consult ILC Applications Department)
  • No programming required
  • Ribbon connectors for easy installation into the panel



  • Panel Level: 2¨ Wide X 3¨ High
  • Gateway Level: 6¨ Wide X 4¨ High and 2¨ Wide X 3¨ High
  • RJ45 connectors for Ethernet based communications
  • Removable screw connectors for data line communications


  • Powered from the panel

Operating Environment:

  • Location: Interior space
  • Operating Temperature: 0° to 50° C
  • Relative Humidity: 10% - 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:

  • FCC Part 15