LightLEEDer Controllable Circuit Breaker Panel LightLEEDer Controllable Circuit Breaker Panel

LightLEEDer Controllable Circuit Breaker Panel

Models: Contact Intelligent Lighting Controls for ordering information

The LightLEEDer programmable breaker panel integrates lighting control into a panel board. The panels are custom built with the desired voltage, breakers, and mains. Panels range in size from 6 to 42 breakers and are equipped with CAT-5 RJ45 connectors for LightSync data line devices and interconnecting panels. Panels include a keyboard and LCD screen, along with USB and TCP/IP connections for easy programming with our free LightLEEDer Pro Software. Add-On modules are available for connecting to BAS, theatrical, or security systems.


LightLEEDer Controllable Breaker Panel

Installation Guides

LightLEEDer Controllable Breaker Installation



  • 1 or 2 pole controllable breakers 1-, 2-, or 3-pole standard breakers
  • Amperage: 15 to 100 Amp
  • Mains: Lugs or breakers -100, 225, 400, and 600 Amp
  • Voltage: 120/240, 208/120, 480/277 VAC


  • 16 gauge NEMA 1 enclosures
  • Provided with pre-drilled mounting holes
  • Provided with a hinged locking door for flush or surface mounting

Power Supply:

  • 120 or 277 VAC @ 1 Amp, 347 VAC optional


  • Up to 42 breakers
  • 2 to 4 add-on modules

Operating Environment:

  • Location: Interior space
  • Operating Temp.: 0° to 50° C
  • Humidity: 10% - 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:

  • UL and CUL Listed

Technical Bulletins

LightLEEDer Controllable Breaker Settings (TB0008)

  • Made in the USADigital CAT-5 Ready
  • Automatic receptacle plug load and lighting circuit control
  • Programming Options are done with a Integrated keypad with 4-line LCD display or using LightLEEDer Pro software via USB or TCP/IP.
  • Network Capability allows you to connect up to 254 panels and 64 LightSync devices per panel, plus an additional 254 devices on the panel network.
  • Internet Capability to interconnect panels across the internet.
  • Relay Groups can comprise any relay or controllable breaker on the network and be assigned to any of the 256 available groups — controlled by any timer, switch, or other external commands.
  • Relay Presets can be programmed from any relay or controllable breaker ON/OFF patterns and be assigned to any of the 256 available presets — controlled by any timer, switch, or other external commands.
  • Timer Scheduling for 128 available timers that can turn breaker relays ON or OFF for Time-of-Day, Astronomical times, and Open/Close.
  • Clock Functions include Automatic Astronomical calculation of Sunrise and Sunset, Adjustable Daylight Saving Timeand Enable/Disable.
  • Switching Inputs accepts virtually any type of switch, momentary or maintained, 2- or 3-wire switch and directly powers motion sensors, data line switches and devices.
  • Switch Input Flexibility is provided with time-of-day function change and also has “and” and “or” logic built in.
  • Add-On Modules available for each controller, and include BACnet IP, BACnet MSTP,  Modbus RTU,  Modbus ASCII, N2, LonWorks, DMX512, DTMF telephone switching and modem.