LightSync Photo Sensor Controller Averaging Module

LightSync Digital Photo Sensor Controller Averaging Module

Models: LSPSCAM-R, LSPSCAM-PR-P, LSPSCAM-R2

The LightSync Photo Sensor Controller Averaging Module will allow monitering of up to 8 LightSync Photo sensor controllers (LSPSC) and provide the LightLEEDer panel a averaged single sensor response. This module is typically used with the 4 sensor input controller (LSPCS-4), or several remote mount LSPCS modules. This averaging controller is used where sampling of the sunlight contribution in a large space needs to be done from multiple locations and then used to control loads across the entire area as one.

Specifications

Controller Physical:

  • 2.50" Wide x 2.50" High
  • Digital addressing switches
  • RJ45 connectors for LS data line connection
  • R option provided with 4-11/16" junction box
  • PR-P option provided with 6.0" x3.5" mounting plate
  • R2 option 6.5" x 9.25" Enclosure for 2 devices

Electrical:

  • Powered from the panel or the LightSync network

Photocell Heads:

  • Outdoor photocell mounts in a 1/2” LB type fitting or junction box
  • Indoor photocell mounts to ceiling tile or other structure
  • Indoor 45 degree photocell mounts to ceiling or other structure. Angled for light harvesting.

Controller Operating Environment:

  • Location: Interior Space
  • Operating Temp.: 0° to 50° C
  • Humidity: 10% to 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Photocell Operating Environment:

  • Location: Interior/Exterior Space
  • Operating Temp.: -35° to 50° C
  • Humidity: 10% to 100% Condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications:

  • UL CUL
  • FCC Part 15
Resources

Cutsheets

LightSync Digital Photo Sensor Controller Averaging Module

Features
  • Made in the USA
  • Digital CAT 5 ready
  • Averages up to 8 Photo Sensor Controllers
  • Provides all the functions of a standard LSPSC module
  • Configured at LightLEEDer panel as a single photo sensor device
  • Digitally addressable device for a unique address
  • Remote mount (R) provided with 4-11/16" J- box
  • Panel Mount with Plate (PR-P) provided with mounting plate and 1-LSPSCAM with space for 1-LS module
  • Remote Enclosure (R2) provided with 1-LSPSCAM and 1-LSPSC-4 module in a NEMA-1 enclosure