LightSync Digital DMX512 Control Modules  LightSync Digital DMX512 Control Modules

LightLEEDer Serial Interface Control Modules

Model: LLSI

The LightLEEDer Serial Interface Module can be added to any panel to provide control from any building automation system using BACnet IP, BACnet MSTP, Modbus RTU, Modbus  ASCII, Modbus TCP or Metasys N2. With the panel module, commands can be sent to the panel to force relays ON and OFF, force relays On and OFF with a timer option (blink, double Blink, HID delay, Alarm ON, Alarm OFF, Pulse ON, and Pulse OFF), monitor relay status, monitor input status, and enable/disable inputs. A single point gateway is available for control and Status of relays, groups, and presets on the network.

Cutsheets

LightLEEDer Serial Interface Control

Wiring Diagrams

LightLEEDer RS232/RS485 Serial Communications Module (WD1002)

Installation Guides

LightSync Serial Input Interface Control Module RS232-485 (ID0626)

LightLEEDer Serial Add-on Module (ID1015)

LightLEEDer Serial Gateway Add-on Module (ID1016)

LightLEEDer Serial Gateway Add-on Module (ID1016)

LightSync TCP/IP LSSIICM Interface (ID0624)

Specifications

Physical: 

  • Dimensions: 2” Wide X 3” High or 2" Wide x 4" Long 
  • RJ45 connectors for Ethernet based communications 
  • Removable screw connectors for data line communications 
  • Panel Level (P) modules connect to LightLEEDer panel 
  • Gateway (N) modules connect to the Network Controller 

Electrical: 

  • Powered from the panel 

Operating Environment: 

  • Location: Interior space 
  • Operating Temp.: 0° to 50° C  
  • Humidity: 10% - 90% Non-condensing  
  • Atmosphere: Non-explosive/corrosive  
  • Vibration: Stationary 

Certifications and Approvals: 

  • FCC Part 15 
Resources

User Manuals

LightLEEDer BACnet IP Panel Level Point Map

LightLEEDer BACnet MSTP Panel Level Point Map

LightLEEDer BACnet/LonWorks Gateway Programming Cable Details

LightLEEDer Gateway Level Modbus Point Map

LightLEEDer N2 Panel Level Point Map

ILC LightLEEDer Protocol Open

Technical Bulletins

LightLEEDer BACnet Configuration GUI (TB1019)

Features
  • Made in the USA 
  • Direct communications for BAS control of lighting panel 
  • Direct control of any relay output giving complete control 
  • True status of relays in the lighting panel 
  • Timer option commands available for blink alerts and alarms 
  • Allows enable/disable commands for switch inputs 
  • Installs directly into any panel 
  • Extractable files from BACnet modules 

Protocols 

  • BACnet IP– an ASHRAE protocol communicating on a TCP/IP network 
  • BACnet MSTP– an ASHRAE protocol communicating on a RS485 network 
  • Modbus RTU– a Modicon protocol communicating on RS485/RS232 in a binary coded format 
  • Modbus ASCII– a Modicon protocol communicating on RS485/RS232 in an ASCII coded format 
  • Modbus TCP– a Modicon protocol communicating on a TCP/IP network 
  • Metasys N2– a Johnson Controls protocol communicating on RS485