Linear Dimming Control Module 0-10V

Linear Dimming Control Module 0-10V

Model: LDCM-PL

EcoSpec® Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and a fixed line voltage input and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. One LDCM can used per run up to the maximum wattage. The LDCM-PL is rated to directly mount to a junction box in a plenum pace for easier installations and to meet building requirements.



  • Power Rating: 450W Max @ 110-120V, 1000W Max @ 277V
  • Max Fixture Run Length: Calculate Maximum Run per LDCM unit based on the Power Consumption of the fixture used.
  • Operating Voltage: 110VAC-120VAC, 277VAC - Auto-Sensing Voltage Switch
  • Operating Hertz: 60 Hz
  • Startup Temperature:  -4°F to 104°F (-20°C to 40°C)
  • Operating Temperature:  -4°F to 104°F (-20°C to 40°C)
  • Storage Temperature:  -40°F to 176°F (-40°C to 80°C)


  • Dimming: 110-120VAC; ELV - RP; converted from 0-10V Controller, 277VAC; ELV - RP; converted from 0-10V Controller


  • Dimensions: W 3.4” x H 2”” x L 7”; (87mm x 50mm x 178mm)
  • Housing / Lens: Injection Molded Polycarbonate
  • Connectors: Lead Wire 6” From Conduit
  • Weight: 0.99 lbs (0.45 kg)
  • Environment: ETL Damp Location
  • Mounting Options: Conduit Mounting For Both Side

Rating & Certifications:

  • ETL / cETL Damp Locations
  • ROHS Compliant
  • Dims ELV only fixtures with 0-10V
  • Simple Installation
  • Direct J-Box Mount
  • 120V and 277V Compatible
  • 450W @120V, 1000W @277V
  • Plenum Rated
  • One LDCM per fixture run