ILC-SWX-1-D 0-10V Dimming Wall Switch Sensor Line Voltage

0-10V Dimming Wall Switch Sensor Low Voltage

Model: ILC-SWX-100-1-D

The Intelligent Lighting Controls family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage ILC 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. ILC products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.

Specifications

Electrical:

  • Operating voltage:  12-24 VAC/VDC
  • Current draw:  2mA (PIR model) 10mA (Dual Tech. models)
  • Output:  Logic High VDC (Occupied Mode)
  • Dimming compatibility:  0-10 VDC ballasts or drivers compliant with IEC 60929 Annex E.2
  • Dimming load:  50 mA (sink only)
  • Recommended power pack:  ILC-SWX-900 (for Stand Alone apps.),  ILC-SWX-900-AX (for Multi-Way apps.)

Environmental:

  • Operating temp:  32°F to 122°F (0°C to 50°C)
  • Relative humidity:  0-95% Non-Condensing, Indoor Use Only

Physical:

  • Size: 2.74" H x 1.68" W x 1.39" D (6.96 x 4.27 x 3.53 cm), not including mounting strap
  • Weight:  4.5 oz
  • Mounting: Single gang switch box
Resources

Cutsheets

0-10V Dimming Wall Switch Sensor Low Voltage

Features

Physical features:

  • Enclosure is 25-40% shallower than other sensors
  • Unique bat-wing shaped lens provides enhanced peripheral detection
  • Modern look and intuitive easy-tap buttons for On/Off, Raise, and Lower
  • Rigged vandal resistant lens
  • Settings are adjustable without removing cover plate

Operational features:

  • Compatible with 0-10v dimmable LED and fluorescent lighting
  • Wall-to-wall passive infrared small motion detection
  • Passive acoustic detection (optional) - prevents false offs when no motion is present
  • 100% passive detection methods - no interference potential from external devices
  • Configurable sensor settings including time delays and occupancy/vacancy operating modes
  • Configurable dimming parameters including high/low trims, turn on levels, and curve types
  • Blue locator LED when lights are off
  • Multi-way/multi-sensor option