Linear Dimming Control Module 0-10V Linear Dimming Control Module 0-10V

EcoSpec™ Linear Dimming Control Module

Model: LDCM

ECOSPEC® Linear Dimming Control Module Plenum Rated (LDCM) takes t 0-10v Dimming Signal and a Fixed Line Voltage Input and converts it to a Reverse Phase Dimmed Output for up to 1000W with a 277V load and 450W on a 120V load. One LDCM can be used per run up to the Maximum Wattage. The LDCM is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.


EcoSpec™ Linear Dimming Control Module



  • Power Rating - 450W MAX @ 110-120V, 1000W MAX @ 277V
  • Max Fixture Run Length - calculate maximum run per LDCM unit based on the power consumption of the fixture use
  • Operating Voltage - 110VAC-120VAC, 277VAC - Auto-Sensing Voltage Switch
  • Operating Hertz - 60 Hz
  • Startup Temperature: - 4°F TO 104°F (-20°C TO 40°C)
  • Operating Temperature: - 4°F TO 104°F (-20°C TO 40°C)
  • Storage Temperature: - 4°F TO 176°F (-20°C TO 80°C)


  • 110-120/277VAC; Reverse Phase
  • Dimming converted from 1-10V Controller


  • Dimensions - W 3.4” x H 2” x L 7” ; (87mm x 50mm x 178mm) Injection Molded
  • Housing / Lens - Polycarbonate
  • Connectors - Lead Wire 6” From Conduit
  • Weight - 0.99 LBS (0.45 KG)
  • Environment - ETL Damp Location
  • Mounting Options - Conduit Mounting For Both Sides

Ratings & Certifications:

  • ETL/cETL Damp Locations
  • Made in the USA
  • Dims Reverse Phase Only Fixtures With 0-10V
  • Simple Installation
  • Direct J-Box Mount
  • 120V and 277V Compatible
  • Auto-Sensing Voltage Switch
  • 450W @120V, 1000W @277V
  • Plenum Rated
  • One LDCM Per Fixture