OSW-D-010_VSW-D-010 OSW-D-010_VSW-D-010

Wall Switch Sensor, Dual Tech, 0-10V Dimming, Line Voltage

MOdel: OSW-D-010, VSW-D-010

Cooper Lighting Solutions’ 0-10V Dual Tech Sensor Dimmer is a 3 in 1 solution that combines functionality of a switchpack, a sensor and a 0-10V dimmer into one wallbox device to help customers save labor costs as well as meet the latest energy codes and standards. Cooper Lighting Solutions’ 0-10V Dual Tech Sensor Dimmer solution offers a convenient and cost  effective way for users to satisfy commercial energy codes like ASHRAE 90.1 and California Title 20 that require designs that enable energy savings for Commercial facilities. Some of the requirements that can be met by a solution incorporating this device include Area Control, Automatic Lighting Shutoff, Manual ON or Partial ON (ASHRAE 90.1 only), Multi-level  Lighting Control and Occupancy Sensor Control. This product can be used in Single-pole (one location) as well as 3-Way (multi-location) applications and is aesthetically compatible with Cooper Lighting Solutions’ decorator style devices and wallplates. This device also allows isolation of its relay for occupancy based control of external power packs. There is an adjustable Auto ON/Manual ON light level setting, so the lights will only initially turn ON to a user defined setting.

Cutsheets

Wall Switch Sensor, Dual Tech, 0-10V Dimming, Line Voltage

pdf
Specifications

Technology:

  • 0-10V Dual Tech Sensor Dimmer
  • Dual Technology Passive Infrared and Ultrasonic sensor technology
  • Ultrasonic Frequency: 40 kHz

Mechanical:

  • Mounting Plate/Strap Dimensions: 4.19” H x 1.73” W (106.55mm x 44mm)
  • Product Housing Dimensions: 2.7” H x 1.73” W x 2.19”D (68.5mm x 43.9mm x 55.62mm)

Environment: 

  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Relative humidity operating: 20% to 90% non-condensing
  • For indoor use only

Housing:

  • Durable, polycarbonate decorator housing with gloss finish
  • Mounting: Fits in a standard 3.5” deep back box

Electrical

  • Neutral is required for installation of device
  • Wiring type: 
    • Single pole and 3-way
    • 8” pre-stripped wire leads, 
    • #16 AWG for Load and GND wires 
    • #18 AWG for all other wires
  • Electrical ratings: 8A 120/277VAC @ 60Hz (LED)
  • Light Intensity Control: Full-range, continuously variable dimming
  • Class 2 dimming output section: 0-10 VDC, 80mA maximum current sink.  
  • 0-10V output supports up to 40 ballasts/ drivers that draw the standard 2mA each   
  • Surge Protection: Meets ANSI/IEEE Std. C62.41, tested to withstand voltage surges up to 6000V and current surges of up to 3000A
  • Radio Frequency Interference: Designed to reduce interference with radio, audio and video equipment 0-10VDC FLR and LED ballasts
  • Voltage Ratings: Permanently marked on device label 
  • Flammability: Meets UL 94 requirements; V2 rated

Hardware Specifications

  • Status Indicators: LED Indicators to indicate motion
  • LED indicators:  Red LED = PIR detection, Green LED = Ultrasonic detection

Controls and Performance:

  • Selectable Time delays:  15 seconds (Test mode), 5 minutes, 10 minutes, 15 minutes, 20 minutes (factory default), 30 minutes 

Coverage:

  • Provides 180 degree field of view with 900 sq. ft. of major and 324 sq. ft. of minor motion coverage

Occupancy Sensor:

  • Occupancy Sensor version allows operations to toggle between Auto ON/Auto OFF or Manual ON/Auto OFF mode
  • Occupancy Sensor version provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light

Dimming control:

  • Full-range preset dimming control provided with horizontal dim/bright bar

Standards/Ratings:

  • cULus Listed to  UL1472, file no. E325082
  • FCC Part 15 Class A 
  • Meets ASHRAE Standard 90.1 requirements
  • Meets CEC Title 24 requirements
  • California Title 20 Compliant
Resources

Typical Drawings

View Code Specific Room Typicals View Distributed Typicals View Relay Typicals View Stand Alone Typicals
Features
  • Compatible with dimmable 0-10V LED and FLR ballasts
  • Dual Technology Passive Infrared and Ultrasonic sensor technology
  • Fully adjustable Auto ON/Manual ON light level settings
  • Provides 180 degree field of view with 900 sq. ft. of major and 324 sq. ft. of minor motion coverage
  • Selectable time delay of 15 seconds (Test mode), 5 minutes, 10 minutes, 15 minutes, 20 minutes (factory default), 30 minutes