LightSync Digital DMX Driver Module LightSync Digital DMX Driver Module

LightSync Digital DMX Driver Module


The LightSync Digital DMX Driver Module is designed to drive DMX512 levels from a LightLEEDer lighting controller using RS485 communications. Each LS DMX Driver Module is capable of controlling up to 64 channels per module, per panel in the LightLEEDer system. Each dimming output channel can be mapped to control from 1 to all of the 512 DMX channels.  This module connects to the local port of any LightLEEDer panel or LLEVO and is addressed as one or multiple dimmer modules. It can be mounted in the LL panel or remotely.


LightSync Digital DMX Driver Module

Wiring Diagrams

LightSync DMX Driver (WD0611)

Installation Guides

LightSync DMX Driver Installation and Configuration Document



  • 3.75" wide X 3.50" high
  • Screw connector for DMX
  • USB mini software programming interface
  • Rotary address and range switches
  • Configuration dip switches
  • Status diagnostic LEDs provided
  • Data line terminator resistor enable jumper
  • Easy installation into any panel

Remote Mount Physical:

  • Enclosure: 6.50” x 9.25” x 2.50 ” with screw cover
  • 1/2” nipple for mounting to an electrical box
  • 6” wire leads provided for high voltage connection
  • Push-to-connect low voltage connections
  • Provided with pre-drilled mounting holes


  • 120/277VAC
  • Current: 150mA
  • Voltage: 24VAC/ 24VDC

Operating Environment:

  • Location: Interior space
  • Operating Temp: 0°-50° C
  • Humidity: 10%-90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:

  • UL CUL

User Manuals

LightSync DMX Driver Module Programming

  • Made in the USA
  • Digital CAT-5 Ready
  • DMX512 output driver
  • Supports the full 512 DMX channels
  • Direct control of any DMX channel from the lighting control panel
  • Map any dimming output channel to any DMX channel
  • 64 dimming output channels per panel
  • Controlled using LightLEEDer options which include; includes timers, presets, inputs, G3 switches, scenes, and touchscreens
  • Installs directly into any panel or remotely
  • Configured through the LL Keypad, LL Pro software, or ILC Pro App
  • DMX mapping can be 1 to 1, or programmable with LightLEEDer DMX Output Map software