LightLEEDer EVO-4X & 8X LightLEEDer EVO-4X & 8X

LightSync Digital EVO-4X, 8X

Models: LSEVO-4X, LSEVO-8X

The LightSync EVO-4X, -8X is a distributed lighting control panel that simplifies installation. This panel expands any LightLEEDer or LLEVO controller to operate 4 or 8 additional R20D relays for up to 20 relays per controller. R20D relays are remote mounted and connect using standard CAT-5 cable. The R20D relay is provided with line voltage and the 0-10V dimming control wire leads for easy connection to your loads.


LightSync Digital EVO-4X, 8X



  • Power surge and spike suppression up to 123 volts on the 20VAC power input to controller
  • Galvanically isolation to 1500V for the 0-10VDC dimmer outputs, with revert to 100% on power loss


  • Enclosure: 9-3/4”x 6”x 3” NEMA 1
  • Galvanized steel enclosure and screw cover
  • Provided with pre-drilled mounting holes
  • High voltage barrier separates Class 2 wiring
  • ½” nipple for mounting to electrical box
  • 6” wire leads for high voltage connections
  • RJ45 connectors provide for easy connection
  • Plenum rated mounting


  • 120/277VAC @.6 amps (120/347VAC Optional)
  • Dimming: 10VDC 100mA sink per relay

Operating Environment:

  • Location: Interior space
  • Operating Temperature: 0° to 50° C
  • Humidity: 10% - 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:  

  • UL and CUL listed
  • FCC Part 15
  • Title 24
  • ASHRAE compliant
  • IECC compliant

Technical Bulletins

LightLEEDer-EVO-4X, 8X Mapping (TB0018)

Input - Output Device Addressing (TB1800)

Product Details

LightLEEDer-EVO-4X, 8X Product Details (PD0022 Rev. A)

  • Made in the USA
  • Distributed lighting controller
  • Expands Outputs from any LLEVO or LightLEEDer controller
  • Remote mounted relay for direct connection to loads
  • Galvanically Isolated 0-10 dimming for up to 8 zones
  • Networked with any LLEVO or LightLEEDer controller
  • Time clock provided by LLEVO or LightLEEDer controller
  • RJ45 connectors for R20 relays and In-Out from LightLEEDer controller bus
  • Plenum rated mounting