EPC-2 Emergency Power Control

Model: EPC-2

Emergency power control for switched loads. In the past emergency lights were kept on 24 hours a day to meet life safety codes. Now, you can use a UL 924 listed Emergency Power Control, Model EPC-2, to convert regular light fixtures into approved emergency lights. During normal operation, the same switch, occupancy sensor, relay panel, or lighting control switch regular and emergency lights ON at full brightness, regardless of switch position.  The EPC-2 is ceiling or wall mounted in a junction box with a single gang plaster ring and is usually located in the area where the emergency fixtures are installed.



Wiring Diagrams

R20D Relay and LVS EPC-2 (WD1003)

  • Model No. EPC-2
  • Sensing Input 120v-277v
  • Load Rating 120v-277v
  • Incandescent Load 1200W (120v) / 1500W (277v)
  • Warranty 5 Year Replacement Warranty
  • Mounting 4-11/16" Junction Box
  • Rating UL94-5VA
  • Shipping Weight/Color 12oz./White
  • Temperature 32 degrees-140 degrees F
  • Flush Mounted Size Single Gag Plate
  • Body Size 1.7" X 3" X 1.2" (W x H x D body)