OSW-P-010_VSW-P-010 OSW-P-010_VSW-P-010

Wall Switch Sensor, PIR, 0-10V Dimming, Line Voltage

Model: OSW-P-010, VSW-P-010

Cooper Lighting Solutions’ 0-10V dimmer sensor is a 3 in 1 solution that combines functionality of a switchpack, a sensor and a 0-10V dimmer into one wallbox device, to help customers save labor costs as well as meet the latest energy codes and standards. Cooper Lighting Solutions’ 0-10V dimmer sensor solution offers a convenient and cost effective way for users to satisfy commercial energy codes like ASHRAE 90.1 and California Title 20 that require designs that enable energy savings for Commercial facilities.  Some of the requirements that can be met by a solution incorporating this device include Area Control, Automatic Lighting Shutoff, Manual ON or Partial ON (ASHRAE 90.1 only), Multi-level Lighting Control and  Occupancy Sensor Control. This product can be used in Single-pole (one location) as well as 3-Way (multi-location) applications and is compatible with Cooper Lighting Solutions’ decorator style devices and wallplates. This device also allows isolation of its relay for occupancy based control of external power packs.


Wall Switch Sensor, PIR, 0-10V Dimming, Line Voltage



  • 0-10V Sensor Dimmer
  • Single pole and 3-Way


  • Mounting Plate/Strap Dimensions: 4.2” H x 1.8” W (106.7mm x 45.7mm)


  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Relative humidity operating: 20% to 90% non-condensing
  • For indoor use only


  • Durable, polycarbonate decorator housing with gloss finish
  • Mounting: Fits in a standard 3.5” deep back box


  • Neutral is required for installation of device
  • Wiring type: 
    • Single pole and 3-way
    • 6” pre-stripped wire leads, #16 AWG 
  • Electrical ratings: 8A 120/277VAC @ 60Hz (LED)
  • Light Intensity Control: Full-range, continuously variable dimming
  • Surge Protection: Meets ANSI/IEEE Std. C62.41, tested to withstand voltage surges up to 6000V and current surges of up to 3000A
  • Radio Frequency Interference: Designed to reduce interference with radio, audio and video equipment
  • Power-failure Memory: Light returns to ON at 50% or lower
  • Voltage Ratings: Permanently marked on device
  • Flammability: Meets UL 94 requirements; V2 rated

Hardware Specifications

  • Status Indicators: LED Indicators to indicate motion


  • cULus Listed to UL244A & UL1472, file no. E325082
  • NOM certified
  • Meets ASHRAE Standard 90.1 requirements
  • California Title 20 Compliant
  • Compatible with dimmable 0-10V LED and FLR ballasts
  • Neutral wire required for installation
  • Adjustable low-level and high-level trim settings
  • LED indicator to provide motion and configuration feedback
  • Build-in surge protection for longer life
  • Push button and rotary dials for easy configuration settings