LightLEEDer-EVO LightLEEDer-EVO

LightLEEDer EVO

Model: LLEVO-TC

The LightLEEDer EVO is a distributed lighting controller that simplifies installation. The LLEVO comes pre-programmed for 16 common lighting applications that can be selected by turning a dial.  The LLEVO can operate as stand-alone or networked, reverting to stand-alone automatically if the network is interrupted. Easily connect up to 4 R20D relays, via CAT-5 or -6 cable, the R20D relay can control lighting loads with 0-10V dimming or receptacles. Programming can be easily modified using the ILC Pro Bluetooth app or LightLEEDer Pro software. The LLEVO can be expanded up to 20 zones by adding an LSEVO-RC, LSEVO-8X or LSLVD.

Cutsheets

LightLEEDer EVO

LightLEEDer Remote20 (R20D) Relays

Wiring Diagrams

LightLEEDer-EVO (WD0002)

Leviton ODD24-IDW to EVO (WD1702)

Installation Guides

LightLEEDer-EVO (ID0019)

Specifications

Safeguards:

  • Power surge and spike suppression up to 123 volts on the 20VAC power input to controller
  • Memory retention for firmware and programming up to 200 years and electrostatic discharge to 4kv
  • Real time clock retention 45 days or greater without power
  • Galvanically isolation to 1500V for the 0-10VDC dimmer outputs, with revert to 100% on power loss

Physical:

  • Enclosure: 9-3/4”x 6”x 3” NEMA 1
  • Galvanized steel enclosure and screw cover
  • Provided with pre-drilled mounting holes
  • High voltage barrier separates Class 2 wiring
  • ½” nipple for mounting to electrical box
  • 6” wire leads for high voltage connections
  • Push to connect low voltage terminals
  • Color coded labels for easy terminal identification
  • RJ45 connectors provide for easy connection
  • Enclosure, suitable for plenum mounting

Integrated Interfaces:

  • 4 inputs for hardwire switches or occupancy sensors
  • Photocell controller for 2 sensor heads or zones
  • RJ-45 port for up to 61 ILC CAT-5 devices
  • 4 RJ-45 ports for R20 remote relays

Electrical:

  • 120/277VAC @.6 amps (120/347VAC Optional)
  • Input: 24 VDC (See below for details)
  • Dimming: 100mA sink
  • Powered Devices/Distance/Input Power Draw:
    • 4 CAT-5 devices, 400' accumulative feet, 200mA occupancy sensor power
    • 5 CAT-5 devices, 500' accumulative feet, 160mA occupancy sensor power
    • 6 CAT-5 devices, 600' accumulative feet, 120mA occupancy sensor power
    • 7 CAT-5 devices, 700' accumulative feet, 90mA occupancy sensor power
    • 8 CAT-5 devices, 800' accumulative feet, 60mA occupancy sensor power
    • Additional LightSync devices can be supported by adding a PSR.

Operating Environment:

  • Location: Interior space
  • Operating Temperature: 0° to 50° C
  • Humidity: 10% - 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:

  • UL and CUL listed
  • FCC Part 15
  • Title 24
  • ASHRAE compliant
  • IECC compliant
Resources

Technical Bulletins

LightLEEDer-EVO Room Combine and Echo Control (TB0610)

UL 924 Lighting Control With 0-10V Dimming (TB0017)

Automatic Demand Response Load Shedding (TB1602)

Vivarium Lighting Sequence of Operations (TB1600)

LightLEEDer Fire Alarm Override Programming (TB0020)

Input - Output Device Addressing (TB1800)

LightLEEDer EVO Programmable Mode (TB0022)

LightLEEDer EVO Pre-Program Control Matrix (TB0013, Rev. G)

Specifications

LightLEEDer Specification

Product Details

LightLEEDer-EVO (PD0019)

Brochures

LightLEEDer-EVO Brochure

Features
  • Made in the USA
  • RJ45 Outputs for up to 4 R20 relays
  • Plug-load compatible
  • Remote mounted relay for direct connection to loads
  • Galvanically Isolated 0-10 dimming for 4 zones
  • Status LED and Override buttons for remote relay control
  • Daylight Control for up to two spaces by adding PC-IND sensors
  • Standalone or networked with any LightLEEDer controller
  • Time clock includes 7/365-day calendar, Daylight Savings Time, Astronomic, Open/Close
  • 200mA power provided for occupancy or vacancy sensors inputs
  • RJ45 connectors for networking and CAT-5 devices
  • Enclosure, suitable for plenum mounting