LightLEEDer-EVO 4X and 8X

LightLEEDer-EVO-4X, 8X

Models: LL-EVO-4X, LL-EVO-8X

The LightLEEDer-EVO is a distributed lighting control panel that simplifies installation. This panel expands any LightLEEDer controller to operate 4 or 8 additional R20 relays for up to 32 relays per controller. R20 relays are remote mounted and connect using standard CAT-5 cable. The R20D relay is provided with line voltage and the 0-10V dimming control wire leads for easy connection to your loads.

Specifications

Safeguards:

  • Power surge and spike suppression up to 123 volts on the 20VAC power input to controller
  • Galvanically isolation to 1500V for the 0-10VDC dimmer outputs, with revert to 100% on power loss

Physical:

  • Enclosure: 9-3/4”x 6”x 3” NEMA 1
  • Galvanized steel enclosure and screw cover
  • Provided with pre-drilled mounting holes
  • High voltage barrier separates Class 2 wiring
  • ½” nipple for mounting to electrical box
  • 6” wire leads for high voltage connections
  • RJ45 connectors provide for easy connection
  • Plenum rated mounting

Electrical:

  • 120/277VAC @.6 amps (120/347VAC Optional)
  • Dimming: 10VDC 100mA sink per relay

Operating Environment:

  • Location: Interior space
  • Operating Temperature: 0° to 50° C
  • Humidity: 10% - 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:

  • UL and CUL listed
  • FCC Part 15
  • Title 24
  • ASHRAE compliant
  • IECC compliant
Features
  • Made in the USA
  • Distributed lighting controller
  • Expands Outputs from any EVO or LightLEEDer controller
  • Remote mounted relay for direct connection to loads
  • Galvanically Isolated 0-10V dimming for 8 zones
  • Networked with any LightLEEDer controller
  • Time clock provided by LightLEEDer controller
  • RJ4 5 connectors for R20 relays and In-Out from LightLEEDer controller bus
  • Plenum rated mounting