LightLEEDer EVO Integrated 2 Relay Controller

Model: LLEVO-INT-2

The LightLEEDer EVO Integrated 2 Relay Controller can operate up to two loads. This Controller includes the configuration options of an EVO with two on-board relays and 0-10V  dimming integrated into one package for easy installation. The LLEVO-INT-2 relay Controller is ideal for a small office with two zones of lighting control with daylight harvesting or one  lighting zone and a plug load. It has RJ-45 ports for local digital LightSync switches, occupancy sensors, and a photo sensor. This convenient and easy to install two relay Controller can  be used as a stand-alone device or networked with other LightLEEDer panels.


LightLEEDer EVO Integrated 2 Relay Controller

Wiring Diagrams

LightLEEDer EVO Integrated 2 Relay Controller (WD0009)

LLEVO-INT-2 and LSEVO-INT-2-RC 4-Load Control Layout (WD0011)

Installation Guides

LightLEEDer EVO Integrated 2 Relay Controller (ID0027)



  • Power surge and spike suppression up to 123 volts from power supply to controller 
  • Memory retention for firmware and programming up to 200 years and electrostatic discharge to 4kV 
  • Galvanically isolation to 1500V for the 0-10VDC dimmer outputs, with revert to 100% on power loss 


  • Enclosure: 3.10" x 3.50" x 1.875" 
  • Plastic enclosure with 1/2" nipple and mounting tab 
  • Color coded wire leads for easy field termination 
  • RJ-45 connectors provide for easy connections 
  • Suitable for plenum mounting 


  • Network In/Out ports for LightLEEDer system connection 
  • Occupancy sensor input with RJ-45 port 
  • Photocell Sensor intput with RJ-45 port for daylight sensor 
  • RJ-45 port for up to 17 digital LS CAT-5 device addresses 

Operating Environment: 

  • Location: Interior space 
  • Operating Temperature: 0° to 50° C 
  • Humidity: 10% - 90% Non-condensing 
  • Atmosphere: Non-explosive/corrosive 
  • Vibration: Stationary   


  • 120/277VAC @ .6 amps 
  • Dimming: 100mA sink per isolated output  


  • 16A, 120/277VAC Electronic Ballast (LED) 
  • 20A 120/277VAC General 
  • 1/4 HP @ 120 VAC Motor Load 
  • Inputs: 24VDC 
  • Powered LS Devices, Distance, Input power available  
    • 1 CAT-5 Devices, 300' accumulative, 70mA Occupancy sensor power 
    • 2 CAT-5 Devices, 500' accumulative, 60mA Occupancy sensor power 
    • 3 CAT-5 Devices, 600' accumulative, 50mA Occupancy sensor power 
    • 4 CAT-5 Devices, 900' accumulative, 40mA Occupancy sensor power 
    • Note: Aditional CAT-5 devices can be supported by adding a LSPSR or LSPSR6 

Certifications and Approvals:

  • UL and CUL listed 
  • FCC Part 15 
  • Title 24 
  • ASHRAE compliant 
  • IECC compliant

Product Details

LightLEEDer EVO Integrated 2 Relay Controller (PD0027)


LightLEEDer-EVO Brochure

  •  Made in the USA 
  • 2 Isolated load relays rated up to 20 Amps for lighting loads or plug-loads 
  • Galvanically Isolated 0-10V dimming outputs 
  • Occupancy sensor input RJ-45 port for motion sensor occupancy or vacancy control 
  • Photocell Sensor input RJ-45 port for daylight monitoring 
  • RJ-45 port for digital LightSync switch devices 
  • Power for digital LightSync switches, photocell sensor and occupancy sensors 
  • Easy installation with everything Integrated in one convenient box 
  • Oversized relays for extended life of product with contacts designed for LED inrush current 
  • Room Controller remote panels supported   
  • Pre-programmed default configuration 
  • Standalone or Networked with any LightLEEDer controller or EVO panel 
  • Enclosure suitable for plenum mounting